The Argus4 Lite + DSC Option, has all the features of the Argus 4 lite(P7030/LT) which include:

• Tri-Mode Sensitivity for increased temperature range performance
• Color battery level indicator and User replaceable external fittings.

It also comes with Dynamic Scene colorization(DSC). Colorists the thermal image to allow the firefighter to pinpoint the hottest areas within the fire scene and is set up by the use of a supplied remote control.

Plus the following standard accessories:

• Soft carry bag
• Side straps 
• One rechargeable battery 
• AC or DC battery charger 
• Operating instructions

The Argus4 LITE P7030/LT/C  thermal imaging camera is a low cost, high quality solution to meet the needs of every firefighter. The Argus4 LITE uses the same highly successful Amorphous Silicon (ASi) Microbolometer Detector used in the Argus4 but allows the end-user to customize their camera to the features they require.   The Argus4 LITE is a simple to operate, robust, self contained camera, which has fully automatic operation; no control or adjustment, is required in use. The camera has been specifically designed to help firefighters to see through smoke, identify and rescue casualties and locate hot spots or the seat and spread of the fire.   The Argus4 LITE is constructed from high quality Radel©R- 5100, which has been chosen for its strength, resistance to heat, water and impact. Protection from shock is provided by a combination of rugged components, optimum mechanical design and protective bumpers. The camera is sealed to allow short-term total immersion in water (IP67). No end-user maintenance is required other than recharging of batteries and post-use external cleaning with a soft cloth. Power for the Argus4 LITE is provided by an integral battery pack located on the top of the camera. The camera has a single on/off button with a delayed off operation to prevent accidental power-down during use. The camera will display a start-up screen until a usable thermal image is produced.

Optional Features -

The Argus4 LITE can be supplied with the same advanced features available on the standard Argus4. These features include:  

Direct Temperature Measurement (DTM) Displays both the temperature of objects within a defined area of the thermal scene and also the ambient temperature of the environment using a sensor mounted on the front of the camera. The above features can be supplied with the camera at time of purchase or added as an after sales upgrade.

WARRANTY

• The camera is supplied with a 2-year warranty as standard.
• Warranty can be extended for up to three years at time of purchase.

More Information

The Argus4 LITE + DSC + DTM option, has all the features of the Argus 4 lite, which include:

• Tri-Mode Sensitivity for increased temperature range performance
• Color battery level indicator and User replaceable external fittings.

Plus the additional features of  Direct Temperature Measurement (DTM) and Dynamic Scene Colorization (DSC). (DTM) Displays both the temperature of objects within a defined area of the thermal scene and also the ambient temperature of the environment using a sensor mounted on the front of the camera. (DSC) Colorises the thermal image to allow the firefighter to pinpoint the hottest areas within the fire scene and is set up by the use of a supplied remote control.

Plus the following standard accessories:

• Soft carry bag
• Side straps
• One rechargeable battery
• AC or DC battery charger
• Operating instructions

The Argus4 Lite + DSC + DTM Option -  is a simple to operate, robust, self contained camera, which has fully automatic operation; no control or adjustment, is required in use. The camera has been specifically designed to help firefighters to see through smoke, identify and rescue casualties and locate hot spots or the seat and spread of the fire.

The Argus4 Lite is constructed from high quality Radel®R- 5100, which has been chosen for its strength, resistance to heat, water and impact. Protection from shock is provided by a combination of rugged components, optimum mechanical design and protective bumpers. The camera is sealed to allow short-term total immersion in water (IP67).

No end-user maintenance is required other than recharging of batteries and post-use external cleaning with a soft cloth. Power for the ArgusTM4 is provided by an integral battery pack located on the top of the camera. The camera has a single on/off button with a delayed off operation to prevent accidental power-down during use. The camera will display a start-up screen until a usable thermal image is produced.

WARRANTY

• The camera is supplied with a 2-year warranty as standard.
• Warranty can be extended for up to three years at time of purchase.

Specifications